POLCA | AllAboutLean.com

What Different Pull Systems Can Be Combined?

July 31, 2023June 8, 2021 by Christoph Roser

In my last few posts I have shown you different ways to establish pull systems, and which one is right for you. This post discusses how you can mix and combine these systems. You can combine some pull systems within the same pull loop, although there are some restrictions. Combinations of different kanban systems are very common, often also including a CONWIP system.

You can also combine different pull systems for sequential loop, where for example a kanban system feeds into a CONWIP system. This blog post is loosely based on chapter 3.3 and 11.1.7 of my new book All About Pull Production: Designing, Implementing, and Maintaining Kanban, CONWIP, and other Pull Systems in Lean Production.

This is a cross post with the same article on Planet Lean.

Which Pull System Is Right for You?

July 31, 2023June 1, 2021 by Christoph Roser

In my last few posts I showed you different types of pull systems, and an overview of the criteria on how to decide which one is right or you. In this post I finally give you a hands-on guide to decide which pull system to use. This blog post is loosely based on chapter 3.2 of my new book All About Pull Production: Designing, Implementing, and Maintaining Kanban, CONWIP, and other Pull Systems in Lean Production. Let’s have a look:

This is a cross post with the same article on Planet Lean.

What Are the Criteria to Decide on a Pull System?

July 31, 2023May 25, 2021 by Christoph Roser

There are different ways to establish a pull system. In my last post I gave an overview of the different types of pull system. Before telling you which one to use when I want to show you the different factors that should go into your decision. What do you have to pay attention to if you want to select a pull system? This post is loosely based on chapter 3.1 of my new book All About Pull Production: Designing, Implementing, and Maintaining Kanban, CONWIP, and other Pull Systems in Lean Production. Let’s have a look:

This is also a cross-post with the same article on Planet Lean.

The Different Ways to Establish Pull Production

July 31, 2023May 18, 2021 by Christoph Roser

Kanban is the best known way to establish pull production. But it is not the only way. There are many different methods to create a pull system. This blog post is loosely based on my new book All About Pull Production: Designing, Implementing, and Maintaining Kanban, CONWIP, and other Pull Systems in Lean Production, which is a practical guide for anyone looking to implement pull systems. Let me give you an overview.

This is a Cross-Post with the (almost) identical article 7 tools to establish pull production on Planet Lean.

Calculating the Number of POLCA Cards

May 16, 2023August 28, 2018 by Christoph Roser

In my previous posts I explained how POLCA works and discussed the pros and cons of POLCA. In this post I will explain how to calculate the number of POLCA cards. While POLCA is overall a feasible method, I do have some critical comments on the method to calculate the number of POLCA cards.

Advantages and Disadvantages of POLCA

March 8, 2022August 21, 2018 by Christoph Roser

In my previous post I described how POLCA (Paired-Cell Overlapping Loops of Cards) is supposed to work. Now let me look at the advantages and disadvantages of the method. Overall POLCA is a valid method of managing job shops. If it is the right one for you depends very much on your production system.

What Is POLCA?

March 8, 2022August 14, 2018 by Christoph Roser

POLCA stands for Paired-Cell Overlapping Loops of Cards with Authorization and was developed by Rajan Suri around 1990. It is sometimes mentioned alongside kanban and CONWIP as a production control system. Let me explain to you how POLCA works. In my next post I look at the pros and cons of POLCA. In my last post of this mini-series, I will show you the calculation for the number of POLCA cards, including some critical comments.

The similar-sounding word Polka is also a Czech dance music and textile pattern, hence the colorful illustration of the polka dots on the left (don’t worry, more technical diagrams will follow below).